Magpul PTS Pmags for PTW

Post your news about Systema PTW, and related to Airsoft here.

Re: Magpul PTS Pmags for PTW

Postby Callum Snell on Thu Mar 07, 2013 10:37 am

I like those tips a lot. Thanks :) Will this sort of thing work for modded RS PMAGs?
Callum Snell
Newbie
 
Posts: 98
Joined: Wed Aug 24, 2011 11:59 pm
Location: Surrey, United Kingdom

Re: Magpul PTS Pmags for PTW

Postby TK8456 on Thu Mar 07, 2013 12:06 pm

Awesome tip

Thanks for sharing. A mate did that last night and his feed fine now too :)
You don't go out looking for a job dressed like that do you, on a weekday?

John Danter TK8456
TK8456
Senior Member
 
Posts: 553
Joined: Wed May 23, 2012 5:35 pm
Location: Cork, Ireland

Re: Magpul PTS Pmags for PTW

Postby Mrck on Thu Mar 07, 2013 2:21 pm

From what I hear, modded RS Pmags feed flawlessly anyway?
PTW Max2 / TM 1911 Custom
Win a STTS HK416 Upper :: Click here
Mrck
Groupie
 
Posts: 211
Joined: Tue May 08, 2012 2:35 pm
Location: Southampton, UK

Re: Magpul PTS Pmags for PTW

Postby The Reptile House on Thu Mar 07, 2013 2:25 pm

Depends who makes them ;)
User avatar
The Reptile House
Admin Group
 
Posts: 1719
Joined: Fri Jun 25, 2010 11:14 am
Location: Bristol, England

Re: Magpul PTS Pmags for PTW

Postby Majinvash on Mon Apr 29, 2013 10:42 am

Hi

Does anyone know which stiffer replacement springs are suitable for the PTS Magpul mags?

I bought these and they do not work.

http://www.rsov.com/product.php?langId= ... 6&cateId=0

The spring is slightly tighter wound and will not go over the spring guide, even if you chop the bottom few coils..

My mags feed fine but cannot feet fast enough for my new 11.1 Lipo... *1st world problems*
User avatar
Majinvash
 
Posts: 48
Joined: Sun Oct 14, 2007 10:24 am
Location: United Kingdom

Re: Magpul PTS Pmags for PTW

Postby old_and_slow on Mon Apr 29, 2013 11:45 am

Majinvash wrote:Hi

Does anyone know which stiffer replacement springs are suitable for the PTS Magpul mags?

I bought these and they do not work.

http://www.rsov.com/product.php?langId= ... 6&cateId=0

The spring is slightly tighter wound and will not go over the spring guide, even if you chop the bottom few coils..

My mags feed fine but cannot feet fast enough for my new 11.1 Lipo... *1st world problems*


I was quite interested until I read the last line.

I take it you use that 'auto' setting.......how common :lol:
"the only thing necessary for the triumph of evil is for good men to do nothing"
User avatar
old_and_slow
Groupie
 
Posts: 159
Joined: Mon Mar 26, 2012 3:18 pm
Location: Surrey, UK

Re: Magpul PTS Pmags for PTW

Postby Majinvash on Mon Apr 29, 2013 12:33 pm

When you follow a bang into a room.. Full Auto is the only way :)

To be honest I am usually firing as I come into the room.. Cos well... Just cos :D
User avatar
Majinvash
 
Posts: 48
Joined: Sun Oct 14, 2007 10:24 am
Location: United Kingdom

Re: Magpul PTS Pmags for PTW

Postby house771 on Tue Jun 11, 2013 12:32 pm

I know this thread is a bit old but having just bought some of these PTS Pmags i need to know how much the casette inside needs to be raised?
I am thinking a little washer could do the same job as the tape without squashing after a while and would be perfect if i am raising it about 1mm
house771
Groupie
 
Posts: 102
Joined: Thu Feb 28, 2013 10:35 pm
Location: England

Re: Magpul PTS Pmags for PTW

Postby Majinvash on Tue Jun 11, 2013 8:03 pm

A washer would do the same job.

I have replaced the tape with thin plastic and works a treat now.
User avatar
Majinvash
 
Posts: 48
Joined: Sun Oct 14, 2007 10:24 am
Location: United Kingdom

Re: Magpul PTS Pmags for PTW

Postby house771 on Tue Jun 11, 2013 8:26 pm

cool we are talking less than 1mm right tho??
house771
Groupie
 
Posts: 102
Joined: Thu Feb 28, 2013 10:35 pm
Location: England

Re: Magpul PTS Pmags for PTW

Postby Majinvash on Wed Jun 12, 2013 9:47 pm

The thickness of the pastic you get on a plastic triangle take away sandwich container lid :)
User avatar
Majinvash
 
Posts: 48
Joined: Sun Oct 14, 2007 10:24 am
Location: United Kingdom

Re: Magpul PTS Pmags for PTW

Postby house771 on Wed Jun 12, 2013 11:29 pm

cool sounds good hope the washer isnt a bit too much
house771
Groupie
 
Posts: 102
Joined: Thu Feb 28, 2013 10:35 pm
Location: England

PreviousNext

Return to Airsoft News



Who is online

Users browsing this forum: No registered users and 3 guests