Shortening an '08 mosfet

Having problems, question or answer? - post it here.

Shortening an '08 mosfet

Postby Benzene on Mon Oct 02, 2017 12:27 am

Hi there,

I'm looking at replacing the crane stock on a 2008 ptw max which will require relocating the battery into the stock tube. It was mentioned on Tac's FB group that it is possible to shorten the '08 mosfet rather than buying a new mini-mosfet, but I can't find any details of how this might be done.

Looking at the mosfet circuitry it runs pretty much the length of the heatsink. I can see that it may be possible to shorten the circuit board by relocating the fuse and lopping off the part of the board which currently holds the fuse, but perhaps there is another trick to it.

Has anyone got any information about how this might be achieved? Or, perhaps better still, a circuit diagram for the Systema mosfet circuitry?

Thanks.
Benzene
Newbie
 
Posts: 2
Joined: Sat Jul 22, 2017 3:39 am
Location: Leicester, UK.

Re: Shortening an '08 mosfet

Postby Blackwolf on Tue Oct 03, 2017 11:21 pm

Hello

Talk to Tackleberry, he does the short version from a 2008 board

Regards

BLACKWOLF
BLACKWOLF aka Francisco Costa Lobo
www.airsoftmechanix.com
User avatar
Blackwolf
Moderator Group
 
Posts: 946
Joined: Sat Jun 30, 2007 8:08 pm
Location: Portugal

Re: Shortening an '08 mosfet

Postby Benzene on Wed Oct 04, 2017 7:02 pm

Thanks for the heads-up Blackwolf. I'll try Tac.
Benzene
Newbie
 
Posts: 2
Joined: Sat Jul 22, 2017 3:39 am
Location: Leicester, UK.


Return to Technical Discussion



Who is online

Users browsing this forum: No registered users and 3 guests