hexmag problems

Having problems, question or answer? - post it here.

hexmag problems

Postby rias on Tue Dec 19, 2017 10:47 pm

hey there!

i've recently bought a 2008 max, but i've had some issues with the bolt catch.

i tried 2 different barrel assemblies and still have the same issue.
if i use a hexmag: after emptying a mag it will keep dryfiring, it doesnt stop.
if i use a systema mag it will automatically stop, until i change mags and press the bolt catch.

the hexmags will feed flawlessly, is there anyway to fix this? or do i need to run systema mags all the time? my other 2008 max doesnt have a problem with them.

kind regards
rias
rias
Newbie
 
Posts: 3
Joined: Thu Nov 09, 2017 12:43 pm

Re: hexmag problems

Postby Gurky on Sun Dec 31, 2017 2:21 pm

Seems to be a general issue with Hexmags. You‘re lucky if they work.
The follower is a tad to long so it‘s pushed down by the nozzle so that the Boltcatch does not engage properly. On top of that the springs are quite weak.

Shortening the followers works quite well but then the follower can get stuck on the hop up chamber.
Gurky
Newbie
 
Posts: 1
Joined: Mon Nov 28, 2016 10:59 am


Return to Technical Discussion



Who is online

Users browsing this forum: No registered users and 2 guests