MAGPULL MIAD GRIP

Having problems, question or answer? - post it here.

Postby jose on Thu Apr 16, 2009 2:34 am

can I use accesories from a real AR-15 in to my systema, like ris units butt stocks flash hiders etc.
User avatar
jose
 
Posts: 98
Joined: Sat Mar 07, 2009 1:04 am
Location: Oregon United States

Postby smokenghosts on Thu Apr 16, 2009 1:46 pm

Rail systems, stocks (although you will need to get a li-po in your buffer most likely), pistol grips which require some modding to fit the motor, gas blocks, front sights, and trigger guards. The flash hider I'm not too sure about. Hope it helps but this is for the MIAD.
User avatar
smokenghosts
 
Posts: 71
Joined: Tue Jul 22, 2008 7:59 pm
Location: United States

Re: MAGPULL MIAD GRIP

Postby nato5.56 on Fri Jul 03, 2009 2:06 pm

Let me introduce my customization of the MIAD Grip. my weapon is 08-model with 490motor.

>> main body
Image
Image
Image
Image

>> front finger chanel ( F2 )
Image

>> Back Straps
Image

>> Grip Core
Image
Image

>> Motor plate
Image
Image
Image
Image

>> Photos on the way of assembly
Image

>> Finished photos
Image
Image
User avatar
nato5.56
 
Posts: 53
Joined: Wed Oct 31, 2007 12:59 am
Location: Japan

Re: MAGPULL MIAD GRIP

Postby stangri on Wed Jul 08, 2009 12:04 pm

So your grip is not actually fixed to the lower in any way? Held on the motor by friction?
stangri
 
Posts: 162
Joined: Thu Jun 11, 2009 7:10 am
Location: YVR / BWS / PUJ

Re: MAGPULL MIAD GRIP

Postby nato5.56 on Wed Jul 08, 2009 3:26 pm

My grip is fixed to the rear part of the grip by the motor plate...

Image
Image
Image
User avatar
nato5.56
 
Posts: 53
Joined: Wed Oct 31, 2007 12:59 am
Location: Japan

Re: MAGPULL MIAD GRIP

Postby lUcIfEr on Wed Jul 08, 2009 6:43 pm

Nice idea, nato! I was always afraid that the polymer endplate might sh*t out on me breaking my ptw at the worst case...
A liberal is a man too broadminded to take his own side in a quarrel. - Robert Frost
I just want you to know that, when we talk about war, we're really talking about peace. - George W. Bush
EXTREMELY RIGHTWINGED.
9/11-NEVER FORGET-NEVER FORGIVE
User avatar
lUcIfEr
 
Posts: 463
Joined: Sun Oct 26, 2008 8:12 am
Location: Tokyo, Japan

Re: MAGPULL MIAD GRIP

Postby nato5.56 on Thu Jul 09, 2009 1:48 am

In case of fixing the Grip to the motor by the Polymer Endplate? As a result, when the grip is processed by this method, I have never broken my PTW.
User avatar
nato5.56
 
Posts: 53
Joined: Wed Oct 31, 2007 12:59 am
Location: Japan

Re: MAGPULL MIAD GRIP

Postby stangri on Thu Jul 09, 2009 7:59 am

Thanks for additional photo, made it much easier to see what you mean. Neat idea and good job modifying the grip!
stangri
 
Posts: 162
Joined: Thu Jun 11, 2009 7:10 am
Location: YVR / BWS / PUJ

Re: MAGPULL MIAD GRIP

Postby nato5.56 on Thu Jul 09, 2009 8:42 am

This modification makes your ptw look good, and it's easy for you to modify the grip! I was able to do this processing in only 2 hours. ( I used only the Dremel. )
User avatar
nato5.56
 
Posts: 53
Joined: Wed Oct 31, 2007 12:59 am
Location: Japan

Re: MAGPULL MIAD GRIP

Postby Blackwolf001 on Wed Jul 22, 2009 3:38 am

Hello

Congratulations on your modification Nato 5.56.

Any questions to me have to come through this Username Blackwolf001 because the other i am wayting for forum administrators to fix.

Regards

Blackwolf
Blackwolf001
Newbie
 
Posts: 3
Joined: Tue Jul 14, 2009 4:22 am

Re: MAGPULL MIAD GRIP

Postby SpecterX on Sun Jan 17, 2010 2:45 am

Good write Up. I am able to use the PTS Grip for WA to modify it to fit PTW. Cos the Real Steel parts are hard to obtain.
SYSTEMA CARBINE M4A1 PTW MAX 2008 CHALLENGE KIT WITH URX RAS
User avatar
SpecterX
 
Posts: 32
Joined: Tue Apr 14, 2009 2:39 am

Re: MAGPULL MIAD GRIP

Postby Gh0stRaven on Mon Jan 18, 2010 3:49 pm

The grip slides over the motor correct?
I see how Wolf's grip is fixed in place - via the grip plate screwed down to the motor. The plate then, in turn, keep the grip in place.

With nato's way, it seems like the little tab in the back of the original systema grip plate is the only thing keep the miad in place.

Is this assumption correct? I'm skeptical as to how which way is better for the long run, but nato's way does make for a cleaner end plate.
=Gh0st.Raven=
User avatar
Gh0stRaven
 
Posts: 131
Joined: Mon Aug 13, 2007 2:20 pm
Location: 60142

PreviousNext

Return to Technical Discussion



Who is online

Users browsing this forum: No registered users and 2 guests

cron