PTW not feeding

All the information that is relevant to MAX Model 2008 weapons.

PTW not feeding

Postby Lipek on Mon Jan 30, 2017 4:51 pm

Hey guys,

I have a PTW 2008 MAX CQBR that just does not want to feed. It's like the nozzle does not go back enough for a bb to load. It loads every second BB. What could be wrong? Where should I start looking?
Lipek
Newbie
 
Posts: 1
Joined: Mon Jan 30, 2017 4:43 pm

Re: PTW not feeding

Postby Honkki on Mon Jan 30, 2017 10:01 pm

Easiest things to start with:
- Try different BB's.
- Clean magazine/try different magazine.
- Clean the cylinder. Especially some aftermarket cylinders have really heavy grease that causes malfunctions.
- Check the shimming on buffer tube cap.

Report after trying these and we can continue from there. ;)
Honkki
 
Posts: 85
Joined: Tue Mar 17, 2009 11:51 am
Location: Finland

Re: PTW not feeding

Postby ljerr2 on Sat Feb 04, 2017 5:18 am

Good suggestions as noted above. I'd check the cylinder nozzle o-ring, too. Do you have another cylinder to swap in? If you do, that helps with the process of elimination.
Good luck.
User avatar
ljerr2
 
Posts: 203
Joined: Sun Nov 25, 2007 3:37 pm
Location: United States


Return to Generation MAX Model 2008



Who is online

Users browsing this forum: No registered users and 3 guests