Systema PTW 08 trigger and ECU

All the information that is relevant to MAX Model 2008 weapons.

Systema PTW 08 trigger and ECU

Postby hayabusa on Tue Dec 25, 2012 9:57 pm

Can anyone help me with a dilemma that I struggle to understand on this particular pice.

I have a Systema M4 PTW 07 and I want to upgrade the internals electronics to 08. I do have the 08 power board that is in the buffer tube, and I need the ECU 08.

Found the ECU on redwolf but,
http://www.redwolfairsoft.com/redwolf/a ... odID=24907

also on their site there was a 04- 07 to 08 kit up http://www.redwolfairsoft.com/redwolf/a ... _later.htm

As u can see in that picture there is also a trigger. What are the difference on the 08 trigger regarding with the old models? Should I place an order for this trigger too? http://www.redwolfairsoft.com/redwolf/a ... d_Type.htm

if I buy the ECU only do I need the selector switch also to be 08 ?
http://www.redwolfairsoft.com/redwolf/a ... or_PTW.htm

Please if anyone can make it clear for me to place the order to take advantage on that Christmas discount :D would be great!
hayabusa
 
Posts: 21
Joined: Mon Nov 03, 2008 7:22 pm
Location: Romania

Re: Systema PTW 08 trigger and ECU

Postby kosteq86 on Thu Dec 27, 2012 5:04 pm

Yes you need the 2008 type trigger, it's different that 2007 one.

The ECU you found is good, but you don't have to buy selector switch because it's the same as '08 version.

So basicly you need 3 things:

- power board/mosfet in buffer tube
- ECU
- 08 type trigger

Hope it clears things up.
kosteq86
Groupie
 
Posts: 193
Joined: Sun Jul 03, 2011 7:36 pm
Location: Poland

Re: Systema PTW 08 trigger and ECU

Postby hayabusa on Sun Dec 30, 2012 1:08 am

It did, thank you.
hayabusa
 
Posts: 21
Joined: Mon Nov 03, 2008 7:22 pm
Location: Romania


Return to Generation MAX Model 2008



Who is online

Users browsing this forum: No registered users and 1 guest