TW5 fireselector falls out

All the information that is relevant to new MP5 goes in here.

TW5 fireselector falls out

Postby Biter on Fri May 30, 2014 12:14 pm

Hey guys,

I just bought a used TW5, but now i have one problem. I can turn the firselector from single shot to safe AND from safe i can turn it one position more down and the right fireselector falls out. What can I do?

Thanks for help and sorry for my bad english.
User avatar
Biter
Newbie
 
Posts: 2
Joined: Fri May 30, 2014 11:54 am
Location: Munich, Germany

Re: TW5 fireselector falls out

Postby Blackwolf on Fri May 30, 2014 1:02 pm

Hello

" Biter " Update your profile please with location, forum rules.

BLACKWOLF
FORUM MODERATOR

Answering your question: which selector?

left cannot fall out because of ball bearing and spring and screw.

Right side can fall out if you turn it behind safe, but you are not supposed to, there is a indentation on the selector and it can only go in in one position, but you have to set the left one in the same position for them to turn at the same time.
BLACKWOLF aka Francisco Costa Lobo
www.airsoftmechanix.com
User avatar
Blackwolf
Moderator Group
 
Posts: 951
Joined: Sat Jun 30, 2007 8:08 pm
Location: Portugal

Re: TW5 fireselector falls out

Postby CxK-ArthurDent on Fri May 30, 2014 6:35 pm

Da kannste nicht viel machen. Die "Funktion" die du beschreibst, ist der normale Weg den Selector
ein- und auszubauen.

Eine Möglichkeit ist es, an geeigneter Stelle eine Bockade einzubauen die es dann verhindert
den Selector unterhalb von Save zu verstellen.

Leider sind genau an diese Position unterhalb der Giffschafe die Kabel verlegt. Dh. man muss die
Madenschraube extrem vorsicht platzieren. Andernfalls haste einen "Kurzen" ..

Das loch kannst du nur bohren, wenn die GB ausgebaut ist.

-> for the english useres : refer to the pictures and skip our german smalltalk.. :D

The litte screw pervents the selector from falling out by blocking it to go under the
save position. Be sure not to touch the wires that are located directly under the screw.

Image

Image
visit us: --> www.CxK-rl.com
User avatar
CxK-ArthurDent
Groupie
 
Posts: 200
Joined: Wed Oct 10, 2012 2:28 pm
Location: Germany

Re: TW5 fireselector falls out

Postby Blackwolf on Fri May 30, 2014 7:45 pm

Hello

" CxK-ArthurDent " Refrain from writing in a different language, and translating it, THIS IS A ENGLISH SPEAKING FORUM.

Regarding the selector, on the left side there is no problem, the problem is on the right hand side

Regards

BLACKWOLF
FORUM MODERATOR
BLACKWOLF aka Francisco Costa Lobo
www.airsoftmechanix.com
User avatar
Blackwolf
Moderator Group
 
Posts: 951
Joined: Sat Jun 30, 2007 8:08 pm
Location: Portugal

Re: TW5 fireselector falls out

Postby Biter on Fri May 30, 2014 9:15 pm

Thank you CxK-ArthurDent. you helped me a lot.

____________

Danke CxK-ArthurDent, hat mir sehr geholfen (German)
User avatar
Biter
Newbie
 
Posts: 2
Joined: Fri May 30, 2014 11:54 am
Location: Munich, Germany


Return to Generation MP5 (2008)



Who is online

Users browsing this forum: No registered users and 2 guests

cron