Another LiPo Question

For the 2012 model

Another LiPo Question

Postby AirsoftHornet on Tue May 14, 2013 9:56 pm

Hello everyone
I have a 2012' PTW non max. Its now equipped with all electronics of FCC: Mini Mosfet, ECU,and Control-Panel. Motor is original Systema.
My question: can I use 11,1V LiPo 20C batteries without burning the motor?
Because I've burned my original 2012' Motor with the stock Systema electronics...

Thanks
AirsoftHornet
Newbie
 
Posts: 27
Joined: Sun Nov 18, 2012 1:09 pm
Location: Switzerland

Re: Another LiPo Question

Postby Blackwolf on Tue May 14, 2013 11:08 pm

Hello

Yes you can, no problem

Regards

Blackwolf
BLACKWOLF aka Francisco Costa Lobo
www.airsoftmechanix.com
User avatar
Blackwolf
Moderator Group
 
Posts: 952
Joined: Sat Jun 30, 2007 8:08 pm
Location: Portugal

Re: Another LiPo Question

Postby AirsoftHornet on Tue May 14, 2013 11:13 pm

Then it was the problem of the stock electronics?
AirsoftHornet
Newbie
 
Posts: 27
Joined: Sun Nov 18, 2012 1:09 pm
Location: Switzerland

Re: Another LiPo Question

Postby thundercactus on Wed May 15, 2013 4:36 am

stock systema can handle the 11.1v lipo no problem
With my used PTW I had an 08 motor, unmodded, that lasted a long time on a 9.6. Burned out after 2 games of using an 11.1v
Dunno if it's common case, but seems to me it's a stock motor problem, nothing wrong with the electronics.
thundercactus
Expert
 
Posts: 434
Joined: Thu Dec 27, 2012 8:04 pm
Location: Calgary, Ab, Canada

Re: Another LiPo Question

Postby AirsoftHornet on Wed May 15, 2013 7:45 pm

Ok...
I changed after the first burned motor to a FCC 2.5 Motor, but this never functioned. I destroyed 3 pinion gears with it.
Because of that my airsoft-dealer said, that I should change to the normal stock motor...
AirsoftHornet
Newbie
 
Posts: 27
Joined: Sun Nov 18, 2012 1:09 pm
Location: Switzerland


Return to Generation Model 2012



Who is online

Users browsing this forum: No registered users and 2 guests