Trigger Issue

For the 2012 model

Trigger Issue

Postby nacci on Mon Jul 29, 2013 7:37 am

Guys,

I just assemble my 2012 systema PTW Max II, i cant pull the trigger, I switched to Semi and Auto, it stuck like as if it is Safe mode?

Can someone tell me what is the problem, I don't wanna risk of opening the gear box and check what's stuck in there.

Thanks
nacci
Newbie
 
Posts: 37
Joined: Sat Jun 08, 2013 3:25 pm
Location: Malaysia

Re: Trigger Issue

Postby Meppie on Mon Jul 29, 2013 7:53 am

Did you place your selector rack correctly? This is the selector rack

This might be the one that prevents your trigger and selection between safe/semi.
Meppie
Groupie
 
Posts: 136
Joined: Wed Jan 19, 2011 9:59 pm
Location: Nijmegen, HOLLAND

Re: Trigger Issue

Postby nacci on Mon Jul 29, 2013 9:06 am

Yea, i put it on the gearbox...where theres a slight hole, i placed it in and push it to far left...

Nvm, later i'll post up some picture.... do u need to wire it with Motor and battery in order to press the trigger ?

Thanks for the feedback..
nacci
Newbie
 
Posts: 37
Joined: Sat Jun 08, 2013 3:25 pm
Location: Malaysia

Re: Trigger Issue

Postby Buffel on Mon Jul 29, 2013 9:41 am

You do not have the electrical parts & battery connected and do have the motor in place? Then it's perfectly normal for the gears to seem stuck in place, the motor magnets are very strong.

Also, the trigger itself only moves a small amount.

So I'm guessing there is nothing wrong with your PTW :)
User avatar
Buffel
Groupie
 
Posts: 116
Joined: Mon Nov 21, 2011 8:48 pm
Location: The Netherlands

Re: Trigger Issue

Postby nacci on Mon Jul 29, 2013 10:18 am

Hi Buffel,

The trigger is different then normal other AEG brand like G&P, Kingarms?

Okay i'll try to put it in again and try, i remembered i switch to semi, the LED light blinking...red color...what does it mean?
nacci
Newbie
 
Posts: 37
Joined: Sat Jun 08, 2013 3:25 pm
Location: Malaysia

Re: Trigger Issue

Postby thundercactus on Mon Jul 29, 2013 1:34 pm

If you haven't shot a PTW before, there's a 3mm trigger pull. It's reduced to 1.5mm in safe.
thundercactus
Expert
 
Posts: 435
Joined: Thu Dec 27, 2012 8:04 pm
Location: Calgary, Ab, Canada

Re: Trigger Issue

Postby nacci on Mon Jul 29, 2013 2:59 pm

no wonder, thanks for the reply.
nacci
Newbie
 
Posts: 37
Joined: Sat Jun 08, 2013 3:25 pm
Location: Malaysia


Return to Generation Model 2012



Who is online

Users browsing this forum: No registered users and 1 guest