Grip/Motor Issue-Help needed

For the 2012 model

Grip/Motor Issue-Help needed

Postby Hunter Jamie on Thu Jan 16, 2014 3:09 am

Hi

I am currently having a problem with my motor / grip

The problem i am having is that if i fire the gun without holding the grip the motor makes a grindy skipping gear sound. Now if i hold the grip like im shooting then pull the trigger i get no problems ,the motor sounds normal

I went skirmishing the other day could the motor of come loose in the grip some how?

The motor was recently serviced by tac too so doubt its motor related failure

Do any of you have any ideas what the problem could be ?

Thanks Jamie
Hunter Jamie
Newbie
 
Posts: 13
Joined: Fri Mar 02, 2012 2:44 pm
Location: United Kingdom

Re: Grip/Motor Issue-Help needed

Postby CxK-ArthurDent on Thu Jan 16, 2014 8:01 am

there are 4 small scews in the top part of the motor .. perhaps those screws are not tight
enough.

Image

you shoud be sure that the 4 plastic scews in the bottom section are tight too.
but be aware not to overtight them cause they will brake !
visit us: --> www.CxK-rl.com
User avatar
CxK-ArthurDent
Groupie
 
Posts: 200
Joined: Wed Oct 10, 2012 2:28 pm
Location: Germany

Re: Grip/Motor Issue-Help needed

Postby Hunter Jamie on Thu Jan 16, 2014 10:12 pm

Hi

I tried what you said . I have tried to tighten the screws but they were all done up.

I also tried a Red Cylinder and same problem.

It's like there is excess movement coming from the motor/grip like I've said before if I hold the grip like normal there are no issues :S

Any more ideas?

Thanks Jamie

Edit: first time taking apart the gun least I've learnt how to do that :D
Hunter Jamie
Newbie
 
Posts: 13
Joined: Fri Mar 02, 2012 2:44 pm
Location: United Kingdom

Re: Grip/Motor Issue-Help needed

Postby CxK-ArthurDent on Fri Jan 17, 2014 8:04 am

btw .. what kind of grip do you use ?
visit us: --> www.CxK-rl.com
User avatar
CxK-ArthurDent
Groupie
 
Posts: 200
Joined: Wed Oct 10, 2012 2:28 pm
Location: Germany

Re: Grip/Motor Issue-Help needed

Postby Hunter Jamie on Fri Jan 17, 2014 11:55 pm

Standard Systema grip

7511 motor

Went to shop to see if they knew what the problem was.. Thing is it worked fine!!!!' No problems at all .
Got it home then the problem comes back !!!

What is going on !? :(
Hunter Jamie
Newbie
 
Posts: 13
Joined: Fri Mar 02, 2012 2:44 pm
Location: United Kingdom


Return to Generation Model 2012



Who is online

Users browsing this forum: No registered users and 2 guests

cron