PTW Picture -Discussion- Thread

Here you show us your PTW's pictures.

Postby -WoTaN- on Mon Nov 06, 2006 9:19 pm

Woah 134a, that lower was awesome! How are those markings done?
I think it does'nt look like a stock PTW-receiver, right?-WoTaN-2006-11-6 23:20:58
WoTaN aka Luckmann
---|PARABELLUM|---
User avatar
-WoTaN-
 
Posts: 52
Joined: Wed Sep 27, 2006 6:50 pm
Location: Sweden

Postby 134a on Tue Nov 07, 2006 2:28 am

It is really a ptw receiver.
The marking and the surface of the receiver is made by a air soft gun shop which in HK. However, the shop don't  help to make the marking anymore because the factory said it is too waste the time. My max project can't start until the shop find a new factory.

134a2006-11-7 4:40:0
134a
 
Posts: 3
Joined: Thu May 25, 2006 2:11 am
Location: Hong Kong

Postby ColSanders on Fri Nov 10, 2006 11:58 pm

Mojo what's the M16 Magazine stock adapter bit?
I'm the Colonel, you're my chicken, prepare to fry.
ColSanders
 
Posts: 102
Joined: Wed Feb 22, 2006 11:00 pm
Location: United States

Postby Mojo on Sat Nov 11, 2006 9:15 am

The CAA Combat Battle Stock (CBS) has a rail built on the side of it. CAA also has a Picatinny Mag Holder which can latch onto the rail on the stock, or if you fancy, all over your front rail system
You can never have enough gear...where ya gonna store all those mags?
User avatar
Mojo
 
Posts: 23
Joined: Wed Sep 13, 2006 7:35 am
Location: United States

Postby -WoTaN- on Sat Nov 11, 2006 9:25 am

Very cool indeed :)
Do you have the battery in the magholder?
WoTaN aka Luckmann
---|PARABELLUM|---
User avatar
-WoTaN-
 
Posts: 52
Joined: Wed Sep 27, 2006 6:50 pm
Location: Sweden

Postby Mojo on Sun Nov 12, 2006 4:18 am

Originally, that was the idea. Then someone suggested I put it in the stock.(The stock has a compartment for 4 CR123s.) After much dremeling,(Thanks, Kyle!) I fit a small Li-Po into the stock. I've taken it to several events, and Its crispy and fires at least 3000 rounds on a full charge. Emptied all 9 mags three times in one night and still going.  
You can never have enough gear...where ya gonna store all those mags?
User avatar
Mojo
 
Posts: 23
Joined: Wed Sep 13, 2006 7:35 am
Location: United States

Postby IBICO on Sun Nov 12, 2006 9:00 am

Mojo wrote: Originally, that was the idea. Then someone suggested I put it in the stock.(The stock has a compartment for 4 CR123s.) After much dremeling,(Thanks, Kyle!) I fit a small Li-Po into the stock. I've taken it to several events, and Its crispy and fires at least 3000 rounds on a full charge. Emptied all 9 mags three times in one night and still going.  


what brand and type of li-po do you use..

I use the Kokam 7.4 2000mAh. Played outdoor in -10Celsius (14 Fahrenheit / 263.15 kelvin)
and after 8-10 mags I only lost about 0.5volt
Had no problem after 5 hours of game.
Don't argue with idiots, they bring you down to their own level and beat you with experience.
Support airsoft radio: www.opsecairsoft.com - website: www.GasGuns.info
User avatar
IBICO
 
Posts: 826
Joined: Tue Feb 21, 2006 5:31 am
Location: Norway

Postby Mojo on Sun Nov 12, 2006 6:21 pm

Its a thunder power 11.1V  1320mah on a gold bolt. Fits right into the stock. Pics forthcoming...

Mojo2006-11-14 7:35:23
You can never have enough gear...where ya gonna store all those mags?
User avatar
Mojo
 
Posts: 23
Joined: Wed Sep 13, 2006 7:35 am
Location: United States

Postby silencery on Sun Nov 19, 2006 11:55 pm

For the guys w/ the VLTOR CASV setups, does the raised rail give enough clearance to use your optics with a full mask?  We play a lot of CQB where masks are required, so I'd like to know if it's usable.

Can you co-witness your iron sights in the lower portion of a scope?

Thanks for all your help!
silencery
 
Posts: 125
Joined: Fri Nov 17, 2006 6:28 am
Location: Southern California

Postby Seiga on Mon Nov 20, 2006 7:56 am

 
Mojo, Great job!!!!!!!!!
User avatar
Seiga
 
Posts: 288
Joined: Mon Mar 06, 2006 6:34 am
Location: Japan

Postby Mojo on Mon Nov 20, 2006 8:13 am

Silencery,
I have no problems using it with my mask. I use an Empire E-Vent so it does have softer cheeks. Yes, I can co-witness using my EO-Tech, although i have the same problem most people do with not being able to use my BUIS. I dont plan on getting a Larue as Im waiting for a Dark Earth 553.
Thanks for the compliment, Seiga. They mean a lot coming from you!
 Mojo2006-11-20 10:23:5
You can never have enough gear...where ya gonna store all those mags?
User avatar
Mojo
 
Posts: 23
Joined: Wed Sep 13, 2006 7:35 am
Location: United States

Postby IBICO on Mon Nov 20, 2006 10:12 am

Anyone want to buy magpul stock?

Ordered a CAA stock now.. hehe
Don't argue with idiots, they bring you down to their own level and beat you with experience.
Support airsoft radio: www.opsecairsoft.com - website: www.GasGuns.info
User avatar
IBICO
 
Posts: 826
Joined: Tue Feb 21, 2006 5:31 am
Location: Norway

Next

Return to PTW's



Who is online

Users browsing this forum: No registered users and 3 guests

cron